Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #9

Editado por David Albarran-Martinez

Edicion aprobada por David Albarran-Martinez

Antes
Después
Sin cambios

Líneas de Paso

[* red] Pry apart the clamshell at the motor end.
[* orange] Separate the clamshell.
[* icon_caution] Two wires connect from the lower frame to the upper frame at the front of the drone. Pulling the clamshell apart hard may damage the connectors and wires.
[* yellow] Press the connector tabs with a spudger and pull on the wire simultaneously.
[* green] Remove the shell from the rest of the drone.

Imagen 3

Eliminado