Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #4

Editado por Ethan Karlinsey

Edicion aprobada por Ethan Karlinsey

Antes
Después
Sin cambios

Líneas de Paso

[* icon_note] The display should now be entirely loose, attached only by the connectors at the top of the device and the fingerprint sensor connector at the bottom of the device.
[* black] With the display slightly raised, press downPress down on the fingerprint sensor with the display slightly raised to disconnect it from the display.
[* black] With the display slightly raised, press downPress down on the fingerprint sensor with the display slightly raised to disconnect it from the display.
[* icon_note] If the fingerprint sensor does not come loose, use the heat gun to loosen its adhesive.