Saltar al contenido principal

Cambios a Paso #2

Editado por Kristen Gismondi

Edicion aprobada por Kristen Gismondi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Place the device screen down on a flat surface.
[* red] Remove eight 9.96 mm10mm Phillips #2 screws (four on each leg of the stand) by turning the screwdriver counterclockwise.
[* red] Remove eight 9.96 mm10mm Phillips #2 screws (four on each leg of the stand) by turning the screwdriver counterclockwise.