Saltar al contenido principal

Cambios a Paso #2

Editado por Andrew Fleming

Edicion aprobada por Andrew Fleming

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Place the device screen down on a flat surface.
[* black] Remove eight 9.96 mm Phillips #2 screws (four on each leg of the stand) by turning the screwdriver counterclockwise.
[* black] LiftRemove the stand off ofby lifting up and away from the backrest of the devicedevice so the legs separate from their mounting plate.
[* black] LiftRemove the stand off ofby lifting up and away from the backrest of the devicedevice so the legs separate from their mounting plate.