Saltar al contenido principal

Cambios a Paso #2

Editado por Sydney Hosokawa

Edicion aprobada por Sydney Hosokawa

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Place the device screen down on a flat surface.
[* blackred] Remove eight 9.96 mm Phillips #2 screws (four on each leg of the stand) by turning the screwdriver counterclockwise.
[* black] Remove the stand by lifting up and away from the rest of the device so the legs separate from their mounting plate.
[* blackred] Remove eight 9.96 mm Phillips #2 screws (four on each leg of the stand) by turning the screwdriver counterclockwise.
[* black] Remove the stand by lifting up and away from the rest of the device so the legs separate from their mounting plate.

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Ninguna imagen anterior

Añadido