Saltar al contenido principal

Cambios a Paso #4

Editado por Ronald Weimar

Edicion aprobada por Ronald Weimar

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Rotate the back over to the side, being careful not to damage the fingerprint sensor ribbon cable.
[* black] Use a plastic pry tool to separate the fingerprint sensor from the back of the phone.
[* icon_reminder] On reassembly, add a piece of simple scotch tape to hold the fingerprint sensor to the phone back.
[* black] Set the phone back aside.