Saltar al contenido principal

Cambios a Paso #3

Editado por Ken

Edicion aprobada por Ken

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom herered] Use the 10 mm socket wrench to unscrew the first of three screws holding in the headlight assembly. The screw is located just to the left of the headlight assembly.
[* orange] Unscrew the second screw located approximately 6 inches below the first.
[* yellow] Locate the third screw at the bottom left corner of the headlight assembly just behind the bumper and remove.
[* icon_caution] When re-installing the screws do not over tighten. Over tightening the screws will result in stripped threads
.
[* black] Insert wisdom herered] Use the 10 mm socket wrench to unscrew the first of three screws holding in the headlight assembly. The screw is located just to the left of the headlight assembly.
[* orange] Unscrew the second screw located approximately 6 inches below the first.
[* yellow] Locate the third screw at the bottom left corner of the headlight assembly just behind the bumper and remove.
[* icon_caution] When re-installing the screws do not over tighten. Over tightening the screws will result in stripped threads
.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Versión Antigua

Nueva Versión