Saltar al contenido principal

Cambios a Paso #5

Editado por Michael Saggese

Edicion aprobada por Michael Saggese

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Locate the Blueblue headlight wire. Use a flathead screwdriver to pry up one side of the clamping teeth and pull the connector off.
[* black] Locate the Blueblue headlight wire. Use a flathead screwdriver to pry up one side of the clamping teeth and pull the connector off.
[* black] Locate the green turn signal wire clamp. Use a flathead screwdriver to push in the tab on the side and pull off the connector.
[* black] Now that all ties are taken care of betweenconnections between the car and the headlight assemblyassembly are disconnected, it is safe to remove the headlight assembly from the cartruck.
[* black] Now that all ties are taken care of betweenconnections between the car and the headlight assemblyassembly are disconnected, it is safe to remove the headlight assembly from the cartruck.