Saltar al contenido principal

Cambios a Paso #5

Editado por Ken

Edicion aprobada por Ken

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Locate the Blue headlight wire. Use a flathead screwdriver to pry up one side of the clamping teeth and pull the connector off.
[* black] Locate the green turn signal wire clamp. Use a flathead screwdriver to push in the tab on the side and pull off the connector.
[* black] Now that all ties are taken care of between the car and the headlight assembly, it is safe to remove from the car.