Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #2

Editado por Cameron Dunn

Edicion aprobada por Cameron Dunn

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the two screws holding down the distributor capcap, by using a flat head screwdriver, and remove the cap, but do not disconnect the spark plug wires.
[* red] Remove the two screws holding down the distributor capcap, by using a flat head screwdriver, and remove the cap, but do not disconnect the spark plug wires.
[* orange] Disconnect the wire that goes from the coil to the distributor at the negative terminal of the coil.
[* yellow] Carefully pull the rotor off the distributor shaft.
[* green] Remove the two screws holding down the breaker plate and pull off the entire breaker plate/points assembly.