Saltar al contenido principal

Cambios a Paso #2

Editado por Noah

Edicion aprobada por Noah

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the two screws holding down the distributor capcap and remove the cap, but do not disconnect the spark plug wires.
[* black] Disconnect the wire that goes from the coil to the distributor at the negative terminal of the coil
.
[* black] Remove the two screws holding down the distributor capcap and remove the cap, but do not disconnect the spark plug wires.
[* black] Disconnect the wire that goes from the coil to the distributor at the negative terminal of the coil
.
[* black] Carefully pull the rotor off the distributor shaft.
[* black] Remove the two screws holding down the breaker plate. and pull off the entire breaker plate/points assembly.
[* black] Remove the two screws holding down the breaker plate. and pull off the entire breaker plate/points assembly.