Saltar al contenido principal

Cambios a Paso #2

Editado por Cameron Dunn

Edicion aprobada por Cameron Dunn

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the two screws holding down the distributor cap and remove the cap, but do not disconnect the spark plug wires.
[* blueorange] Disconnect the wire that goes from the coil to the distributor at the negative terminal of the coil.
[* greenyellow] Carefully pull the rotor off the distributor shaft.
[* orangegreen] Remove the two screws holding down the breaker plate and pull off the entire breaker plate/points assembly.
[* blueorange] Disconnect the wire that goes from the coil to the distributor at the negative terminal of the coil.
[* greenyellow] Carefully pull the rotor off the distributor shaft.
[* orangegreen] Remove the two screws holding down the breaker plate and pull off the entire breaker plate/points assembly.

Imagen 2

Versión Antigua

Nueva Versión