Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #2

Editado por Noah

Edicion aprobada por Noah

Antes
Después
Sin cambios

Líneas de Paso

[* blackred] Remove the two screws holding down the distributor cap and remove the cap, but do not disconnect the spark plug wires.
[* blackblue] Disconnect the wire that goes from the coil to the distributor at the negative terminal of the coil.
[* blackgreen] Carefully pull the rotor off the distributor shaft.
[* blackorange] Remove the two screws holding down the breaker plate and pull off the entire breaker plate/points assembly.
[* blackred] Remove the two screws holding down the distributor cap and remove the cap, but do not disconnect the spark plug wires.
[* blackblue] Disconnect the wire that goes from the coil to the distributor at the negative terminal of the coil.
[* blackgreen] Carefully pull the rotor off the distributor shaft.
[* blackorange] Remove the two screws holding down the breaker plate and pull off the entire breaker plate/points assembly.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión