Cambios al paso #2
Líneas de Paso
| + | [title] Remove 4 side external screws |
|---|---|
| + | [* black] Start by taking out the 4 obvious screws, two on each side. |
| + | [* black] You'll need a long-necked T6 driver if you want to get these out cleanly. (At least 1" / 25mm.) |
| + | [* black] The pro tech toolkit does not have one long enough, so I used a slightly hacked hex key on two of them (stripping the heads) and ended up drilling out the other two because the hex key is not a good fit. |
Imagen 1
Ninguna imagen anterior
Añadido
Imagen 2
Ninguna imagen anterior
Añadido
Imagen 3
Ninguna imagen anterior
Añadido