Saltar al contenido principal

Cambios al paso #2

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

+[* black] Pull the camera cable parallel to the face of the I/O board toward the corner of the Air to disconnect it from its socket, using the tip of a spudger to help push the connector out of its socket.
+[* icon_caution] Do not lift upward on this cable as you disconnect it, as its socket may break off the logic board.

Imagen 1

Ninguna imagen anterior

Añadido