Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #2

Editado por Buddy Eluchil

Edicion aprobada por Buddy Eluchil

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use the flat end of a spudger to loosen the adhesive underneath the digitizer ribbon cable.
[* black] PullVery carefully pull the digitizer ribbon cable straight out of its sockets on the logic board.
[* black] PullVery carefully pull the digitizer ribbon cable straight out of its sockets on the logic board.