Saltar al contenido principal

Cambios al paso #1

Editado por Stephen Figueira

Edicion aprobada por Stephen Figueira

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Insert any tool with a small, flat end (such as a spudger/flathead screwdriver/ plastic opening tool) into the groove in the bottom of the power input and wedge the plastic slot out from the amp.
+[* black] Insert any tool with a small, flat end (such as a spudger, flathead screwdriver or plastic opening tool) into the groove in the bottom of the power input and wedge the plastic slot out from the amp.
[* black] There will be two compartments (one enclosed, one exposed) each containing a fuse. The exposed fuse is the active fuse and the enclosed one is a spare.