Saltar al contenido principal

Cambios al paso #3

Editado por Allison Shinskey

Edicion aprobada por Allison Shinskey

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Remove the Phillips (5-mm head) 6-mm screw that holds the circuit board to the outer shell of the fan.
-[* icon_caution] Make sure the fan is unplugged while removing the circuit board as you may get shocked.
+[* black] Remove the Phillips 6-mm screw that holds the circuit board to the outer shell of the fan.
+[* icon_caution] Shock warning: Make sure the fan is unplugged before removing the circuit board.