Saltar al contenido principal

Cambios al paso #2

Editado por John Rivera

Edicion aprobada por John Rivera

Antes
Después
Sin cambios

Líneas de Paso

[* black] Carefully remove both wire harnesses connected to the pump.
[* black] Squeeze and pull back hose clamp.
[* black] Twist drain hose off of pump.
[* black] Using a 1/4" socket wrench, remove the three mounting screws.
[* black] Pull the pump out of place.
-[* icon_note] Pulling the pump way take a little force.
+[* icon_note] Pulling the pump away takes a little force.