Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #1

Editado por Aaron Correya

Edicion aprobada por Aaron Correya

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] Ensure the engine is off and cooled down before starting this guide.
[*
black] Using compressed air and a 5/16" socket or wrench, removerag, clean the three bolts holding the plastic cover on to the engine.
[* black] Lift away the plastic cover. Note that the starter is attached to the cover and will come off with it
heat sink.
[* icon_caution] Ensure the engine is off and cooled down before starting this guide.
[*
black] Using compressed air and a 5/16" socket or wrench, removerag, clean the three bolts holding the plastic cover on to the engine.
[* black] Lift away the plastic cover. Note that the starter is attached to the cover and will come off with it
heat sink.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido