Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #9

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Place one end of the c-clamp jaw over the old pad. Place the other end of the jaw on the rear of the caliper. Tighten the c-clamp to push the piston back into the caliper.
[* black] CAUTION -icon_caution] This step will push oil back into the Brake reservoirbrake reservoir, which could overflow depending on whether the level has been topped up or not. Brake fluid willoverflow. This can be wasteful, messy, and damage a Carsyour car's paint workjob. Make sure the reservoir isn't topped off.
[* black] CAUTION -icon_caution] This step will push oil back into the Brake reservoirbrake reservoir, which could overflow depending on whether the level has been topped up or not. Brake fluid willoverflow. This can be wasteful, messy, and damage a Carsyour car's paint workjob. Make sure the reservoir isn't topped off.