Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #9

Editado por micknews2

Edicion aprobada por Andrew Optimus Goldheart

Sin cambios

Líneas de Paso

[* black] Place one end of the c-clamp jaw over the old pad. Place the other end of the jaw on the rear of the caliper. Tighten the c-clamp to push the piston back into the caliper.
[* black] CAUTION - This step will push oil back into the Brake reservoir which could overflow depending on whether the level has been topped up or not. Brake fluid will damage a Cars paint work.