Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #10

Editado por Matthew Lee

Edicion aprobada por Matthew Lee

Sin cambios

Líneas de Paso

[* black] Slide the caliper over the brake pad bracket.
[* black] Reassemble the tire assembly. Follow the Steps 1-7 in '''reverse order'''.
[* black] The caliper mounting bolts and the lug nuts should be very tight.
[* black] Remove the jackstand. Then lower and remove the floorjack.
[* black] If needed, repeat the guide for all four tires.
[* black] '''CAUTION! ''': Before driving the car, pump the brake pedal several times in order to push the caliper piston back against the brake pads. If this step is not performed, the car may not brake reliably when first driven. For '''your safety''', this step is highly recommended.