Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #8

Editado por Robert Yu

Edicion aprobada por Robert Yu

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Depress the caliper piston.
[* black] The new brake pads are thicker than the old pads. Because of this, the caliper piston protrudes too far out to allow enough clearance for the caliper to be placed over the new pads.
[* black] Place an old brake pad over the caliper piston.
[* black] Place one end of the c-clamp jaw over the old pad. Place the other end of the jaw on the rear of the caliper. Tighten the c-clamp to push the piston back into the caliper.