Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #3

Editado por Adam O'Camb

Edicion aprobada por Adam O'Camb

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Identify the two mounting bolts on the rear of the caliper.
[* black] Using a 12 mm wrench or socket, remove the two caliper mounting bolts.
[* blackicon_note] Alternatively, you may remove only the bottom mounting bolt and, using the top bolt as a hinge, [https://d3nevzfk7ii3be.cloudfront.net/igi/knDMB6UuPMkjmZWG.full|rotate the caliper up and away from the rotor|new_window=true] to access the brake pads. If you do this, skip the next step.
[* blackicon_note] Alternatively, you may remove only the bottom mounting bolt and, using the top bolt as a hinge, [https://d3nevzfk7ii3be.cloudfront.net/igi/knDMB6UuPMkjmZWG.full|rotate the caliper up and away from the rotor|new_window=true] to access the brake pads. If you do this, skip the next step.