Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereLay your iMac stand-side down on a flat surface.
[* black] To lift the front bezel off the iMac, simultaneously:
[* green] Use your thumbs to press in the RAM arms and hold the iMac down.
[* blue] Use your index fingers to pull the small bridge of material on the front bezel toward yourself.
[* violet] Pull the Front bezel up with your index fingers.
[* black] Once the small bridge of material has cleared the RAM arms, lift the front bezel by its lower edge just enough to clear the bottom edge of the rear case
.
[* black] Insert wisdom hereLay your iMac stand-side down on a flat surface.
[* black] To lift the front bezel off the iMac, simultaneously:
[* green] Use your thumbs to press in the RAM arms and hold the iMac down.
[* blue] Use your index fingers to pull the small bridge of material on the front bezel toward yourself.
[* violet] Pull the Front bezel up with your index fingers.
[* black] Once the small bridge of material has cleared the RAM arms, lift the front bezel by its lower edge just enough to clear the bottom edge of the rear case
.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Ninguna imagen anterior

Añadido