Saltar al contenido principal

Cambios al paso #1

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.
-[* black] Pull the chip directly out from its connector.
+[* black] Simultaneously pull the tabs on each side of the RAM chip away from the center of the chip. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.
+[* black] Pull the RAM chip directly out from its connector.
[* icon_note] If there are two RAM chips installed, repeat the above procedure for the second chip.