Saltar al contenido principal

Cambios al paso #3

Editado por Cristyne Ramirez

Edicion aprobada por Cristyne Ramirez

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Use a screwdriver and punch a hole directly in the center label. There you will find a hidden screw.
-[* black] Remove the five 10mm screws located on the back of the controller using a T8 screwdriver.
+[* orange] Use a screwdriver and punch a hole directly in the center label. There you will find a hidden screw.
+[* red] Remove the five 10mm screws located on the back of the controller using a T8 screwdriver.

Imagen 1

Versión Antigua

Nueva Versión