Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Richard Suovanen

Edicion aprobada por Richard Suovanen

Antes
Después
Sin cambios

Líneas de Paso

[* black] Locate the small silver transistor between the front left speaker and the tuning knob. The antenna should be attached directly below the transistor.
[* red] Solder the end of[guide|750|Deolder] the antenna to the device using the soldering iron.
[* icon_note] Heat
wire from the existing solder tocircuit board, and remove the old antennawire.
[* red] Solder the end of[guide|750|Deolder] the antenna to the device using the soldering iron.
[* icon_note] Heat
wire from the existing solder tocircuit board, and remove the old antennawire.