Saltar al contenido principal

Cambios al paso #6

Editado por Adam O'Camb

Edicion aprobada por Adam O'Camb

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Press down firmly with your finger and hold tightly for 30 seconds. This will set the pressure sensitive adhesive.
-[* black] Repeat the last seven steps for every foot.
+[* black] Press the new foot down firmly with your finger and maintain pressure for 30 seconds to set the pressure sensitive adhesive.
+[* black] Repeat the last seven steps for each of the four feet.
+[* icon_reminder] Reassemble the lower case using the new set of screws. These have thread locker pre-applied and should stay put longer than the original screws.