Saltar al contenido principal

Cambios a este Paso

Editado por Andrew Bookholt

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* red] Remove seven Torx T8 screws from the heat sink and fan assembly.
[* icon_reminder] The screw in the upper right corner is shorter than the others.
[*
black] Insert wisdom hereLift the heat sink and fan assembly from its right edge and pull it away from the left side of the lower case to clear the transparent plastic ambient light sensor cover on the DC-in board.
[* black] Lift the heat sink and fan assembly out of the lower case.
[* icon_note] If you need to mount the heat sink back into the laptop, we have a [guide|744|thermal paste guide] that makes replacing the thermal compound easy
.
[* red] Remove seven Torx T8 screws from the heat sink and fan assembly.
[* icon_reminder] The screw in the upper right corner is shorter than the others.
[*
black] Insert wisdom hereLift the heat sink and fan assembly from its right edge and pull it away from the left side of the lower case to clear the transparent plastic ambient light sensor cover on the DC-in board.
[* black] Lift the heat sink and fan assembly out of the lower case.
[* icon_note] If you need to mount the heat sink back into the laptop, we have a [guide|744|thermal paste guide] that makes replacing the thermal compound easy
.

Imagen 1

Versión antigua

Nueva versión