Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #13

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Lift the logic board from its left edge and rotate it toward the right side of the lower case.
[* icon_caution] The logic board on this model has a tendency to get caught on the lower case near the DVI port at the upper right corner. If it catches as you are rotating it, stop to avoid bending and breaking the logic board.
[* black] Rotate the logic board until it is nearly vertical, and wiggle it around until it releases from the lower case.
[* icon_reminder] When reinstalling your logic board, be sure to apply [product|IF179-010|thermal paste] to the areas shown in redCPU. Our [guide|744|thermal paste guide] makes it easy.
[* icon_caution] Only replace the gray thermal paste on the CPU. The white thermal material on the GPU chips can be reused.
[* icon_reminder] When reinstalling your logic board, be sure to apply [product|IF179-010|thermal paste] to the areas shown in redCPU. Our [guide|744|thermal paste guide] makes it easy.
[* icon_caution] Only replace the gray thermal paste on the CPU. The white thermal material on the GPU chips can be reused.