Saltar al contenido principal

Cambios al paso #13

Editado por Logan Kennedy

Edicion rechazada por Andrew Optimus Goldheart

Sin cambios

Líneas de Paso

[* icon_note] Make sure that each adhesive strip is placed in the correct location and orientation before peeling the backing.
[* black] Peel the brown backing up off each adhesive strip.
[* icon_reminder] Some of the adhesive strips are quite small and may require some patience to peel the backing.
+[* black] Attaching a new front panel can require a fair amount of weight due to the stiffness of the new digitizer cable. We suggest putting something heavy and flat on the device to ensure adhesion.