Saltar al contenido principal

Changes to Step #5

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom herePlace the largest L-shaped adhesive strip on the top left corner of the front panel.
[* black] Smooth the strip down from the center out, taking care to not trap any air bubbles between the strip and the front panel.
[* icon_note] Do not remove the backing until you have placed every strip on the front panel
.
[* black] Insert wisdom herePlace the largest L-shaped adhesive strip on the top left corner of the front panel.
[* black] Smooth the strip down from the center out, taking care to not trap any air bubbles between the strip and the front panel.
[* icon_note] Do not remove the backing until you have placed every strip on the front panel
.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Eliminado