Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Andrew Bookholt —

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the two T8 Torx screws securing the PRAM battery & USB board to the lower case.
[* black] Pull the board away from the side of the lower case to separate itthe USB socket from the USB connector, then liftbezel on the board slightlylower case.
[* black] Pull the board away from the side of the lower case to separate itthe USB socket from the USB connector, then liftbezel on the board slightlylower case.