Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the two T8 Torx screws securing the PRAM battery & USB board to the lower case.
[*
black] Insert wisdom herePull the board away from the side of the lower case to separate it from the USB connector, then lift the board slightly.
[* red] Remove the two T8 Torx screws securing the PRAM battery & USB board to the lower case.
[*
black] Insert wisdom herePull the board away from the side of the lower case to separate it from the USB connector, then lift the board slightly.

Imagen 1

Versión Antigua

Nueva Versión