Cambios al paso #1
Editado por Ericka Mendoza —
Edicion aprobada por Ericka Mendoza
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Using the spudger, disconnect the white ribbon cable from the motherboard by prying up the latch up. |
|---|---|
| + | [* black] On the back panel of the device, remove the four (4) M2.5xL6 screws at the top of the photo Phillips #0 screwdriver. |
| + | [* black] Unscrew the three (3) screws at the bottom of the photo using a T5 Torx screwdriver. |