Cambios al paso #5
Editado por Maximillian McDonald —
Edicion aprobada por Maximillian McDonald
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Completely remove the thick white ribbon cable using the plastic opening tool by prying up the latches attaching each end. | |
| [* red] Remove the three 4mm screws using the J0 Phillips screwdriver. | |
| [* orange] Disconnect the battery from the motherboard. | |
| - | [* black] Lift the battery up and out. There may be a small piece of translucent blue tamper-proof tape holding the battery in place. Remove the tape if present. |
| + | [* black] There may be tamper-proof tape holding the battery in place. Remove the tape if present. |
| + | [* black] Remove the battery. |