Cambios al paso #3
Editado por Maximillian McDonald —
Edicion aprobada por Maximillian McDonald
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Turn the device right side up and open the lid. | |
| [* black] Insert the spudger in seem between the keyboard plate and the base of laptop. | |
| [* black] Run the spudger along seem, prying up as you go. | |
| [* black] Separate the keyboard plate from the base, lifting from the front. | |
| [* icon_caution] There are 3 ribbon cables connecting the keyboard plate to the base. Lifting the keyboard plate too high without disconnecting the ribbon cables may damage the connectors. | |
| - | [* black] Disconnect the 3 (black, white, and copper color) ribbon cables using the plastic opening tool. |
| + | [* black] Disconnect the 3 (black, white, and copper color) ribbon cables using the plastic opening tool by prying up the latches holding each cable in place. |
| [* black] Completely remove the keyboard plate. |