Saltar al contenido principal

Cambios al paso #14

Editado por Adam O'Camb

Edicion aprobada por Adam O'Camb

Antes
Después
Sin cambios

Líneas de Paso

[* black] Tilt the top of the logic board away from the rear enclosure.
- [* black] As you tilt the logic board, pull the right speaker connector to the right and out of the way of the board.
+[* icon_caution] When removing and installing the logic board, take care not to damage the delicate microphone ribbon cable at the bottom left.
[* black] Lift the logic board straight up and out of the iMac.
[* icon_caution] Be careful not to snag the board on any of the rear enclosure's screw posts.

Imagen 1

Eliminado

Imagen 2

Eliminado

Imagen 3

Eliminado