Saltar al contenido principal

Changes to Step #5

Editado por Walter Galan

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the four 3.4 mm Phillips screws from the DVI connector side of the PowerBook.
[* icon_reminder] When replacing these screws, you must reinstall each screw in the correct order. Begin by installing the screw closest to the display hinge, and go out from there.
[* icon_note] During reassembly, do not reinstall the two screws on the right into the DVI port anchor holes.