Saltar al contenido principal

Cambios al paso #1

Editado por Brett Hartt

Edicion aprobada por Brett Hartt

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Using the flat end of a spudger, pry the I/O Board connectorboard cable straight up out of its socket on the I/O board.
[* black] In a similar fashion, remove the I/O Board connectorboard cable from its socket on the I/O Boardboard.
[* black] Using the flat end of a spudger, pry the I/O Board connectorboard cable straight up out of its socket on the I/O board.
[* black] In a similar fashion, remove the I/O Board connectorboard cable from its socket on the I/O Boardboard.