Saltar al contenido principal

Cambios al paso #7

Editado por plomero20

Edicion rechazada por Mariana

Sin cambios

Líneas de Paso

+[* black] Use the flat end of a spudger to pry up and loosen the right edge of the daughterboard.
+[* black] Swing the daughterboard to the left to move it out of its recess.
+[* icon_caution] Do not attempt to remove the daughterboard. It is still attached to the frame.
+[* icon_reminder] During reassembly, be sure to [|route the white antenna cable through the daughterboard notch and wrap the black antenna cable around the screw post|new_window=true].