Saltar al contenido principal

Cambios al paso #8

Editado por Richdave

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Video card remains.
-[* black] Be sure to apply a new layer of thermal paste to the face of the graphics processor (shown in red).
-[* icon_note] We have a [guide|744|thermal paste guide] that makes reapplying thermal compound simple.
-[* icon_reminder] Before reattaching your video card heat sink, use the flat end of a spudger to re-spread the thermal compound over the face of both video RAM chips (shown in green).
+[* icon_note] ***Quality Tip.*** As per the [guide|744|thermal paste guide], For best results, ensure you clean the old compound off thoroughly before applying new compound
+[* black] Be sure to apply fresh thermal paste to the face of the graphics processor (shown in red) ***AND*** both video RAM chips (shown in green).