Saltar al contenido principal

Cambios a Paso #7

Editado por Josh Calvetti

Edicion aprobada por Josh Calvetti

Sin cambios

Líneas de Paso

[title] Replace the heatsink
[* black] Carefully replace the heatsink on top of the processor, taking care to ensure the fan connector is properly connected.
[* black] Begin to screw down the bolts again. You'll want to tighten in the same back and forth pattern to apply equal pressure across the processor.
[* black] '''DO NOT OVERTIGHTEN!''' It is very important to pay attention to the torque on the screws. Once a screw no longer wants to tighten with ease, back off.

Imagen 1

Ninguna imagen anterior