Saltar al contenido principal

Cambios a Paso #4

Editado por Josh Calvetti

Edicion aprobada por Josh Calvetti

Eliminado
Añadido
Sin cambios

Líneas de Paso

[title] Clean the thermal paste from the heatsink
[* black] Using a lint free cloth (such as a coffee filter) and high percentage isopropyl alcohol, clean the bottom of the heatpad on the heat sink. It should have a bright sheen to it once you have finished.
[* black] Take care not to bump the thermal sensor (shown in red)
[* black] You can also clean the paste from the old processor if you are planning on keeping it- just be very careful not to damage the underside of the CPU where the contacts are.

Imagen 1

Versión Antigua

Nueva Versión