Saltar al contenido principal

Cambios al paso #5

Editado por Taylor Peters

Edicion aprobada por Taylor Peters

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use the blue plastic opening tool from the iFixit tool kit to wedge and loosen the seal all the way around the edges. Carefully lift up the keyboard panel to remove it from the casepanel.
[* red] Disconnecticon_caution] When lifting the two keyboard ribbon bands frompanel, do not lift it all the motherboard before completing the disassembly. Flip both black hinges open to remove the ribbons. Lightly tug the bands out to complete the process.
[* icon_caution] Do not rip or break
way as the two connection ribbons connecting the keyboard to the motherboard. If you do, the two components will no longer able to comunicate with one anothermotherboard must be disconnected.
[* black] Use the blue plastic opening tool from the iFixit tool kit to wedge and loosen the seal all the way around the edges. Carefully lift up the keyboard panel to remove it from the casepanel.
[* red] Disconnecticon_caution] When lifting the two keyboard ribbon bands frompanel, do not lift it all the motherboard before completing the disassembly. Flip both black hinges open to remove the ribbons. Lightly tug the bands out to complete the process.
[* icon_caution] Do not rip or break
way as the two connection ribbons connecting the keyboard to the motherboard. If you do, the two components will no longer able to comunicate with one anothermotherboard must be disconnected.
[* icon_note] It is recommended to break the seal of the case starting at the upper corners closest to the hinge.