Saltar al contenido principal

Cambios al paso #5

Editado por Jessica Browne

Edicion aprobada por Jessica Browne

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use the blue plastic opening tool from the iFixit tool kit to wedge and loosen the seal all the way around the edges. Carefully lift up the keyboard panel to remove it from the case.
[* red] Disconnect the two keyboard ribbon bands from the motherboard before completing the disassembly. Flip both black hinges open to remove the ribbons. Lightly tug the bands out to complete the process.
[* icon_caution] Do not rip or break the ribbons connecting the keyboard to the motherboard. If you do, the two components will no longer able to functioncomunicate with one another.
[* icon_caution] Do not rip or break the ribbons connecting the keyboard to the motherboard. If you do, the two components will no longer able to functioncomunicate with one another.
[* icon_note] It is recommended to break the seal of the case starting at the upper corners closest to the hinge.