Saltar al contenido principal

Cambios al paso #5

Editado por Kyle McMearty

Edicion aprobada por Kyle McMearty

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use the blue plastic opening tool infrom the iFixit tool casekit to breakwedge and loosen the seal all the way around the case and removeedges. Carefully lift up the keyboard panel to remove it from the case.
[* red] carefully remove the ribbons connectingDisconnect the two keyboard toribbon bands from the motherboard by grippingbefore completing the ribbon closedisassembly. Flip both black hinges open to remove the mother board and gently tuggingribbons. Lightly tug the bands out to complete the process.
[* icon_caution] Do not rip or break the ribbonribbons connecting the keyboard to the motherboard. If you do, the two components arewill no longer able to communicatefunction with one another.
[* black] Use the blue plastic opening tool infrom the iFixit tool casekit to breakwedge and loosen the seal all the way around the case and removeedges. Carefully lift up the keyboard panel to remove it from the case.
[* red] carefully remove the ribbons connectingDisconnect the two keyboard toribbon bands from the motherboard by grippingbefore completing the ribbon closedisassembly. Flip both black hinges open to remove the mother board and gently tuggingribbons. Lightly tug the bands out to complete the process.
[* icon_caution] Do not rip or break the ribbonribbons connecting the keyboard to the motherboard. If you do, the two components arewill no longer able to communicatefunction with one another.
[* icon_note] It is recommended to break the seal of the case starting at the upper corners closest to the hinge.