Saltar al contenido principal

Cambios al paso #5

Editado por Jessica Browne

Edicion aprobada por Jessica Browne

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use the blue spungerplastic opening tool in the iFixit tool case to break the seal around the case and remove the keyboard from the case.
[* black] carefully remove the ribbons connecting the keyboard to the motherboard by gripping the ribbon close to the mother board and gently tugging.
[* black] Use the blue spungerplastic opening tool in the iFixit tool case to break the seal around the case and remove the keyboard from the case.
[* black] carefully remove the ribbons connecting the keyboard to the motherboard by gripping the ribbon close to the mother board and gently tugging.
[* icon_caution] Do not break the ribbon connecting the keyboard to the motherboard. If you do, the two components are no longer able to communicate with one another.
[* icon_note] It is recommended to start withbreak the cornersseal of the case starting at the upper corners closest to the hinge.
[* icon_note] It is recommended to start withbreak the cornersseal of the case starting at the upper corners closest to the hinge.